|
|||||||||
|
SMG/interlink® |
Instruments
for Environmental, Health and Safety Professionals,
HVAC Engineers and Technicians, Manufacturing Engineers, Quality Control and Laboratory Professionals |
||||||||
| |||||||||
Advanced Calibration Designs (ACD) Electrochemical Hydrogen Calibration Gas Generator
ACD is proud to introduce the HydroGen, our newest electrochemical gas generator. The HydroGen gives hydrogen calibration gas using an ‘unlimited life’ electrochemical gas generating cell. The cell is capable of generating hour after hour of calibration gas with no pre-set end of service life.
The HydroGen is microprocessor controlled and has an LCD display allowing field adjustable ppm and flow rate. With a range from 50 ppm to 1,250 ppm, the HydroGen allows calibration on a variety of sensors. In addition, the HydroGen can easily be changed from English to French, German or Spanish in the field.
The HydroGen gas generator has a built-in mass flow sensor that automatically compensates pump flow for altitude and temperature. The mass flow sensor combined with our advanced electrochemical cell technology provide a highly accurate calibration source.
Features
The HydroGen gas generator’s features include:
- Compact “hand-held” design
- Adjustable ppm and flow rate
- Low power consumption
- Automatic purge on shut down
- Alkaline battery powered
Specifications
| Hydrogen (H2) | 50 - 1,250 ppm |
| Air Flow Rate | 0.2 to 1.0 LPM |
| Warm-up Time | 300 Seconds |
| L x W x H | 8.50 x 4.25 x 3.00" |
| Weight | 3 pounds |
| Operating Temperature | 0 to 50°C |
| Relative Humidity | 0 - 100% |
| Accuracy | +/- 10% |
| Battery Power | 4 alkaline "C" |
| Battery Life | 10 hours @ .5 LPM |
Ordering Information
|
|
|
|
| HydroGen instrument complete, including cell |
|
$2500.00
|
All HydroGen units are shipped certified as directly traceable to NIST with an accuracy of +/- 10% of the gas output and includes three foot hose, a nylon carrying case, an instruction manual and 4 size" C" batteries.
Cal 2000 Spare Parts and Accessories
|
|
|
|
| Plunger feet fastener |
|
$6.00
|
| Outlet Fitting, body (1/8 NPT) quick connect |
|
$12.00
|
| Hose connector, insert (hose barb) quick connect |
|
$12.00
|
| Charcoal Filter Element, one each |
|
$15.00
|
| Charcoal Filter Element, 12 Pack |
|
$150.00
|
| Continuous operation adapter, 115VAC with US plug |
|
$55.00
|
| Hose, with connector, norprene, 5' |
|
$34.00
|
| Nylon carrying case, HydroGen |
|
$90.00
|
| Hard Body, Water Resistant, Padded Carrying Case |
|
$135.00
|
| HydroGen manual |
|
$12.00
|
Return
to SMG/interlink®
For more information Email 
SMG/Interlink®
Interlink Marketing Corporation
dba SMG/interlink®
PO Box 260795
Plano, Texas 75026
Toll free 1-800-804-6196
Ph: 972-985-0883
Fx: 972-985-3252
2203 Glen Forest Ln
Plano, Texas 75023
Copyright © 1997-2012 Interlink Marketing Corporation
Home | Anemometers | Borescopes | Calibration gases | Gas detectors | Heat stress monitors | IAQ monitors | IR cameras | Light/UV meters | Manometers | Moisture meters | Noise dosimeters | pH meters | Pitot tubes| Radiation meters | Sampling pumps | Sound meters | Thermometers | Other resources
