Home button About button
Blog button
        

SMG/interlink®
Serving our customers since 1994
Instruments for Environmental, Health and Safety Professionals,
HVAC Engineers and Technicians, Manufacturing Engineers,
Quality Control and Laboratory Professionals
Bios - driving a higher standard in flow measurement

Bios Definer™ 1020 Primary Gas Flow Calibrator
5 slm to 500 slm
(±0.25% of reading volumetric at STP)

The Definer™ 1020 is a compact and powerful calibrator featuring Bios' patented and proven DryCal® technology. The Definer 1020 calibrator has an operating range from 5 to 500 liters per minute. Up to ten times the volume of any other piston prover on the market! at an accuarcy of ±0.25% of reading!

The portability of this new model, which weighs in at a "feathery" 90lbs. is a dramatic and welcome improvement over the cumbersome bell provers, used in the past.

  • Flow Ranges - 5-500 sL/min

  • Accuracy - 5-500 sL/min ±0.25% of reading*

  • Weight - 90 lbs/ 41kg

  • Dimensions (H x W x D) - 24W" x 30H" x 12D"

  • Flow measurements - Single, Continuous or Burst modes

  • Flow measurements in the average, 1 - 100 measurements

* At a gas pressure of 760 mmHg, and a gas temperature of 25° centigrade with standardization temperature set to 21.1° centigrade.

User-Selectable Measurement Units
Volumetric Flow L/min, cf/min
Standard Flow sL/min, scf/min
Pressure mm Hg, PSI , kPa
Temperature °C, °F

 

Bios Definer 1020 Specifications
Data Cable: 1 meter, for use with data port, Bios Optimizer™ software, and PC serial port
Data Port: RS-232 (serial), for use with data cable and Bios Optimizer™ software
Display: Graphical LCD with backlight
Flow Measurement Cell: Integrated (all-in-one design; no additional flow models)
Flow Measurement Style: Single (manual), Continuous or Burst, with averaging function user-selectable from 1 to 100
Flow Measurement Type: Volumetric (primary by nature), Standardized
Flow Mode: Pressure or suction
Gas Compatibility: Noncorrosive, noncondensing, noncombustible gases, less than 70% humidity
Humidity (Ambient): 0-70%, noncondensing
Inlet and Outlet Fittings: 1 ½” Swagelok® compression fitting
Overpressure Release Fitting: ½” Swagelok® compression fitting
Storage Temperature: 0–70° C
Power: External power module
Input: 100-240 VAC, 1.6A (max), 50-60 Hz
Output: 12 VDC, 3.0 A
Pressure (Operating): 10 - 19.5 PSI (absolute)
Temperature (Operating): 15-35°C
Temperature Sensor: Accuracy ±0.03% (max), measured in the gas flow stream
Pressure Transducer: 0-20 PSI (absolute), accuracy ±0.05%
FS (typical),±0.10% (max)
Purge fittings: ¼” Swagelok® compression fittings
RoHS Compliant: Yes
Valve Operation: Air supply: 80-100 PSI (not provided)
Fitting: ¼” Swagelok® compression
Warranty: 1 year

Return to top

Return to SMG/interlink®
For more information  Email Mail  SMG/Interlink®
Interlink Marketing Corporation
dba SMG/interlink®
PO Box 260795
Plano, Texas 75026
Toll free 1-800-804-6196
Ph: 972-985-0883
Fx: 972-985-3252
2203 Glen Forest Ln
Plano, Texas 75023

credit card logos

Copyright © 1997-2012 Interlink Marketing Corporation

SiteLock