|
|||||||||
|
SMG/interlink® |
Instruments
for Environmental, Health and Safety Professionals,
HVAC Engineers and Technicians, Manufacturing Engineers, Quality Control and Laboratory Professionals |
||||||||
| |||||||||
|
||||||||||||||||
 |
| 410-1/2 | 460 | 510 | 511 | 540 | 606-1/2 | 610 | 810 |
Pocket Pro Series of Instruments | |
| Measurements
|
Features
|
testo
Pocket Pro 410-1 Vane Anemometer &
|
|
|
The testo 410-1 anemometer and 410-2 anemometer and thermohygrometer are all-around tools for the HVAC engineer and HVAC technician. Use them to eliminate air stratification and drafts, and compare air flow quality against acceptable guidelines.
|
Technical Data |
||
Velocity |
||
Measuring range |
80 to 4000 fpm |
|
|
Resolution |
1 fpm |
|
|
Accuracy |
+/-40 fpm + 2% of reading |
|
|
Units |
m/s, km/h, fpm, knots, perceived temperature, C/F (windchill), Beaufort |
|
| Temperature | ||
|
Measuring range |
14 to 122 F | |
|
Resolution |
0.1 F | |
|
Accuracy |
+/- 0.9 F | |
|
Units |
C/F | |
| Humidity (410-2 only) | ||
|
Measuring range |
0 to 100% RH | |
|
Resolution |
0.1% RH | |
|
Accuracy |
+/- 2.5% RH (5 to 95% RH) | |
|
Units |
% RH, wet bulb, dewpoint | |
| Operating temperature | 14 to 133 F | |
| Battery type | Alkaline (2 x AAA) | |
| Battery life | 410-1:
100 hrs 410-2: 60 hrs (without backlit display) |
|
| Dimensions (including protective cap) | 5 x 1.7 x 1 inches | |
| Ordering information/part number | ||
|
410-1 Vane Amemometer |
0560 4101 | $149.00 |
|
410-2 Vane Anemometer and Thermohygrometer |
0560 4102 | $231.00 |
testo Pocket Pro 460 Optical Tachometer |
||
 |
Verify fan, shaft, rotor and motor rpm
|
|
|
Technical
Data
|
||
| Measuring range | 100 to 29,999 rpm | |
| Resolution | 0.1
rpm (100 to 999.9 rpm) 1 rpm (1,000 to 29,999 rpm) |
|
| Accuracy | ±(0.02% of reading + 1 digit) | |
| Units | rpm, rps | |
| Measuring rate | 0.5 sec | |
| Operating temperature | 32 to 120 °F | |
| Battery type | Alkaline (2 x AAA) | |
| Dimensions (including protective cap) | 4.5 x 1.7 x 1 inches | |
| Ordering information/part number | 0560 0460 | $188.00 |
testo Pocket Pro 510 Differential Pressure and Velocity |
||
 |
Perform diagnostic tests such as Total External Pressure (TESP) and differential pressure, plus duct velocities and manifold pressures.
|
|
|
Technical
Data
|
||
| Measuring range | ±40" H2O | |
| Resolution | 0.01" H2O | |
| Accuracy | ±0.01" H2O (0 to 0.12" H2O)±0.02" H2O (0.13 to 0.4" H2O) ±0.04" H2O + 1.5% of reading (0.41 to 40" H2O) | |
| Units | hPa, mbar, Pa, mm H2O, mm Hg, in H2O, in Hg, psi | |
| Air velocity | m/s, fpm (when used with optional Pitot tube) | |
| Operating temperature | 32 to 122 °F | |
| Battery type | Alkaline (2 x AAA) | |
| Battery life | 50 hrs (avg. without backlit display) | |
| Dimensions (including protective cap) | 4.5 x 1.7 x 1 inches | |
| Ordering information/part number | 0560 0510 | $190.00 |
testo Pocket Pro 511 Absolute Pressure |
||
 |
Easily and quickly perform pressurization risk assessments for combustion air zones as well as room to room pressurization tests without running a reference hose.
|
|
|
Technical
Data
|
||
| Measuring range | 9 mm Hg to 35 mm Hg | |
| Resolution | 0.001 mm Hg | |
| Accuracy | 0.01 mm Hg | |
| Units | hPa, mbar, Pa, mm H2O, m Hg, in H2O, in Hg, psi | |
| Altitude | M, ft (calculated via absolute pressure) | |
| Measuring rate | 0.5 sec | |
| Operating temperature | 32 to 122 °F | |
| Battery type | 200 hrs (average without backlit display) | |
| Dimensions | 4.5 x 1.7 x 1 inches | |
| Ordering information/part number | 0560 0511 | $226.00 |
 |
Measures light intensity to address comfort and fatigue concerns which influence productivity and safety.
|
|
| Technical Data | ||
| Measuring range | 0
to 99,99 Lux 1 Lux (0 to 19,999 Lux) 10 Lux (20,000 to 99,999 Lux) |
|
| Accuracy | ±3% (compared to reference) | |
| Units | Lux, Footcandle | |
| Operating temperature | 32 to 122 °F | |
| Battery type | Alkaline (2 x AAA) | |
| Battery life | 200 hrs (average without backlit display) | |
| Dimensions (including protective cap) | 5 x 1.7 x 1 inches | |
| Ordering information/part number | 0560 0540 | $175.00 |
 |
Monitor
material moisture to predict drying times, ensure construction best
practices and check for water intrusion and damage.
|
|
|
Technical
Data
|
||
| Material Moisture | ||
|
Measuring range |
0 to 90% | |
|
Resolution |
0.1% | |
|
Accuracy |
±1% (conductivity) | |
|
Measuring rate |
0.5 sec | |
| Air Humidity (606-2 only) | ||
|
Measuring range |
0 to 100% RH | |
|
Resolution |
0.1% RH | |
|
Accuracy |
±2.5% RH (5 to 95% RH) | |
|
Measuring rate |
0.5 sec | |
| Air temperature (606-2 only) | ||
|
Measuring range |
14 to 122 °F | |
|
Resolution |
0.1 °F | |
|
Accuracy |
±0.9 °F | |
|
Units |
°C/°F | |
|
Measuring rate |
0.5 sec | |
| Operating temperature | 14 to 122 °F | |
| Battery type | Alkaline (2 x AAA) | |
| Battery life | 606-1:
200 hrs 606-2:130 hrs (average without backlit display) |
|
| Dimensions (including protective cap) | 4.5 x 1.7 x 1 inches | |
| Ordering information/part number | ||
|
606-1 Material Moisture (Pin style) |
0560 6060 | $139.00 |
|
606-2 Material Moisture (Pin style), Air Temperture and Air Humidity |
0560 6062 | $246.00 |
 |
Perform IAQ/temperature/humidity analysis on those difficult to control complaints. Obtain highly accurate wet bulb, dry bulb and relative humidity measurements to evaluate humidity control and equipment sizing concerns.
|
|
|
Technical
Data
|
||
| Temperature | ||
|
Measuring range |
14 to 122 °F | |
|
Resolution |
0.1 °F | |
|
Accuracy |
±0.9 °F | |
|
Units |
°C/°F | |
| Humidity | ||
|
Measuring range |
0 to 100% RH | |
|
Resolution |
0.1% RH | |
|
Accuracy |
±2.5% RH (5 to 95% RH) | |
|
Units |
% RH, wet bulb, dewpoint | |
| Operating temperature | 14 to 122°F | |
| Battery type | Alkaline (2 x AAA) | |
| Battery life | 200 hrs (average without backlit display) | |
| Dimensions (including protective cap) | 4.5 x 1.7 x 1 inches | |
| Ordering information/part number | 0560 0610 | $204.00 |
 |
Ideal for measuring temperature differences between air and walls, or windows or other surfaces. Excellent for pinpointing potential heat loss/gain areas. Safely perform non-contact temperature measurement of heated equipment, surfaces and moving parts such as motor shafts and belts.
|
|
|
Technical
Data
|
||
| Surface temperature (IR) | ||
|
Measuring range |
-22 to 572 °F | |
|
Resolution |
0.1°F | |
|
Accuracy |
±3.6°F
(-22 to 212°F) ±2% reading +1 digit (remaining range) |
|
|
Optics |
6:1 | |
| Air temperature | ||
|
Measuring range |
-14 to 122°F | |
|
Resolution |
0.1°F | |
|
Accuracy |
±0.9°F | |
|
Units |
°C/°F | |
| Battery type | Alkaline (2 x AAA) | |
| Battery life | 50 hrs (average without backlit display) | |
| Dimensions (including protective cap) | 4.5 x 1.7 x 1 inches | |
| Ordering information/part number | 0560 0810 | $135.00 |
|
